Olympus Epoch 600 Flaw Detector

Flash Sale Used Olympus Epoch 600 Ultrasonic Flaw Detector with probe transducer. Comes with 90 Days warranty. Everything is guaranteed 100% functional with no issues.

The EPOCH 600 Digital Ultrasonic Flaw Detector combines Olympus’ industry leading conventional flaw detection capabilities with the efficiency of a highly portable, intuitive instrument. The EPOCH 600 flaw detector’s blend of efficient menus and direct access keys allows you to take advantage of the highest quality flaw detection platform with exceptional ease of use.

Key Features

• Designed to meet the requirements of EN12668-1
• Perfect Square tunable square wave pulser
• Digital high dynamic range receiver
• Eight digital filters for enhanced signal-to-noise ratio
• 2 kHz PRF for rapid scanning
• Knob or navigation pad adjustment configurations
• Large, full VGA sunlight readable display
• Long battery life, supporting lithium-ion or alkaline batteries
• Standard dynamic DAC/TVG and onboard DGS/AVG
• 2 GB microSD memory card for data transfers and storage
• Optional Corrosion Module software
• USB On-The-Go (OTG) for PC communication
• Alarm and VGA outputs
• Optional analog output

Physical Features:

• The EPOCH 600 is a lightweight, portable flaw detector built to be rugged and flexible for nearly any inspection. Some key physical features include:
• Large, full VGA resolution transflective display for vivid clarity in any indoor lighting and direct sunlight conditions
• Rubber overmolded bumpers on all four corners for shock absorption and anti-marring considerations
• Four-point harness connection for chest straps
• “No tools” access to battery compartment and side I/O door
• Continuous position stand with right angle crook for improved stability from 0 to 180 degrees
• Gasketed side door for USB OTG connection and removable memory
• Standard internal, rechargeable lithium-ion battery
• Standard AA battery tray for extended portable use
• Lightweight, ergonomic design for increased portability and ease of use

EPOCH 600 Specifications:

GENERAL

• Overall dimensions (W x H x D): 236 mm x 167 mm x 70 mm (9.3 in. x 6.57 in. x 2.76 in.)
• Weight: 1.68 kg (3.72 lb), including lithium-ion battery
• Keypad: English, International, Japanese, Chinese
• Languages: English, Spanish, French, German, Japanese, Chinese, Portuguese
• Transducer connections: BNC or Number 1 LEMO
• Data storage: 50,000 IDs onboard, removable 2 GB microSD card (standard)
• Battery type: Single lithium-ion rechargeable standard
• Battery life: 15 h to 16 h (lithium-ion), 3 h (alkaline)
• Power requirements: AC Mains: 100 VAC to 120 VAC, 200 VAC to 240 VAC, 50 Hz to 60 Hz
• Display type: Full VGA (640 x 480 pixels) transflective color LCD, 60 Hz update rate
• Display dimensions (W x H, Diag.): 117 mm x 89 mm, 146 mm (4.62 in. x 3.49 in., 5.76 in.)

PULSER

• Pulser: Tunable Square Wave
• PRF: 10 Hz to 2000 Hz in 10 Hz increments
• Energy settings: 100 V, 200 V, 300 V or 400 V
• Pulse width: Adjustable from 45 ns to 5,000 ns (0.1 MHz) with PerfectSquare technology
• Damping: 50, 100, 200, 400 Ω

RECEIVER

• Gain: 0 to 110 dB
• Maximum input signal: 20 V p-p
• Receiver input impedance: 400 Ω ± 5%
• Receiver bandwidth: 0.2 MHz to 26.5 MHz at –3 dB
• Digital filter settings: Eight digital filter sets standard (0.2-10 MHz, 2.0-21.5 MHz, 8.0-26.5 MHz, 0.5-4 MHz, 0.2-1.2 MHz, 1.5-8.5 MHz, 5-15 MHz, DC-10 MHz)
• Rectification: Full-wave, Positive Half-wave, Negative Half-wave, RF
• System linearity: Horizontal: ± 0.5% FSW
• Resolution: 0.25% FSH, amplifier accuracy ± 1dB
• Reject: 0 to 80% FSH with Visual Warning
• Amplitude measurement: 0 to 110% full screen height with 0.25% resolution
• Measurement rate: Equivalent to PRF in all modes

CALIBRATION

• Test modes: Pulse Echo, Dual, or Through Transmission
• Units: Millimeters, inches, or microseconds
• Range: 3.36 mm to 13,405 mm (0.132 in. to 527 in.) at 5,900 m/s (0.2320 in./µs)
• Velocity: 635 m/s to 15240 m/s (0.0250 in./µs to 0.6000 in./µs)
• Zero offset: 0 to 750 µs
• Display delay: –59 mm to 13401 mm (–2.323 in. to 527.6 in.) @ longitudinal velocity in steel
• Refracted angle: 0° to 85° in 0.1° increments

GATES

• Measurement gates: 2 fully independent gates for amplitude and TOF measurements
• Gate start: Variable over entire displayed range
• Gate width: Variable from Gate Start to end of displayed range
• Gate height: Variable from 2 to 95% full screen height
• Alarms: Positive and Negative Threshold, Minimum Depth (Gate 1 and Gate 2)

MEASUREMENTS

• Measurement display locations: 5 locations available (manual or auto selection)
• Gate (1, 2): Thickness, Soundpath, Projection, Depth, Amplitude, Time-Of-Flight, Min./Max. Depth, Min./Max. Amplitude
• Echo-to-Echo: Standard Gate 2-Gate 1, Optional IF Gate Tracking
• Other measurements: Overshoot (dB) value for DGS/AVG, ERS (equivalent reflector size) for DGS/AVG, AWS D1.1/D1.5 rating (D), Reject Value
• DAC/TVG: Standard
• DAC points: Up to 50 points, 110 dB dynamic range
• Special DAC modes: Custom DAC (up to 6 curves)
• Curved surface correction: Standard OD or Bar correction for Angle Beam measurements
• Corrosion (optional): Zero-cross measurement algorithm, V-Path correction, Single or Echo-to-Echo

Included:

• Epoch 600 flaw detector
• Original charger (New)
• Original transport case (New)
• BCB-58-6 cables, Original Olympus (New)
• BCM-74-6 cable (New, Olympus)
• BCMH6-74-6 cable
• Serial adapter cable
• CH5000 desktop charger (Inspired)
• Olympus batteries
• A542S transducer, 2.25 MHz x 0.25″ with 60-degree wedge W-202 and BCM-74-6 cable
• Gamma Dufp transducer, 5.0 MHz / 0.25″
• Gamma transducer, 2.25 MHz / 1.0″
• Gamma transducer, 2.25 MHz, 0.5″ x 1.0″
• AB transducer, 1.0 MHz, 1.0″ x 1.0″
• Gamma transducer, 2.25″ x 1.0″
• Gamma transducer, 0.5″ x 1.0″
• Gamma transducer, 0.5″ x 0.75″
• 45-degree wedge, 1/2″ x 1″
• 45-degree wedge, 1″ x 1″
• 45-degree AB wedge – W1616
• 60-degree wedge, 1/2″ x 1″
• 60-degree wedge, 1″ x 1″
• 70-degree wedge, 1/2″ x 1″
• 70-degree wedge, 1″ x 1″